Description
Introducing Laboratory Centrifuge 8 branch model HB320
HB320 8 branch laboratory centrifuge, made in Iran, Sigma design, is manufactured and supplied using high quality motors and one year warranty. This product has an open head and the ability to use 15 cc baguettes and is fully digital.
Among the applications of the HB320 centrifuge is the use as a PRP centrifuge to separate blood platelets and separate fat in the beauty, skin and hair industry, as well as as a clinical centrifuge.
Features of HB320 8 branch centrifuge
- The body of the device is made of steel with electrostatic paint coating.
- The head of the device is made of steel and is produced and balanced according to a special program.
- Baguettes for holding pipes are produced using special molds made of Ultramid material.
- The door of the device has a microswitch and prevents the device from operating if the door is open.
- The material of the door is unbreakable plexiglass for greater safety.
- This device has the ability to obtain a calibration certificate from the companies affiliated to the standards department.
Technical specifications of HB320 centrifuge
- Has a power of 110 watts
- Has a voltage of 220 volts
- Weight 13 kg
- Engine speed 4000 rpm
- Current intensity 0.5 amps
How to work with HB320 centrifuge
- The centrifuge must be placed on a flat surface.
- Connect the connector to the power supply.
- Turn the device key on.
- After making sure that the baguettes are in place, place the test sample tubes in a crosswise manner (balance) inside the baskets and close the machine door, so that both machine locks are closed.
- The engine speed of the device is adjusted by the speed button.
- The working time of the device is set by the time button.
- The device starts working by pressing the start button.
- After reaching the engine speed set by the user, the engine speed of the device is fixed.
- After the set time, the device will turn off automatically.
Note: Do not open the door of the centrifuge while working with the centrifuge. - The device door has a microswitch.
- To turn off the machine during operation, first press the stop button to stop the machine, then open the machine door and take out the samples.
- The device is installed in such a way that if the door of the device is opened for any reason, the motor will automatically shut down and the device will not start until the door is completely closed.
- To prevent the pipes from breaking, use the bottom of the basket in the device.
Frequently asked questions
Is this device capable of calibration?
yes It is easily calibrated by the standard department and calibration companies.
The digital board of the device is programmable, what does it mean?
This means that the user can program the machine to reach 3000RPM in 5 seconds.
What does an opening head centrifuge mean?
That is, the movement is in the form of a swing at an angle of 90 degrees.
